Shenyang Jingcheng Electromechanical Equipment Co., Ltd. Bazhou branch
沉阳精诚机电设备有限公司霸州分公司
Add to Cart
High Speed Cold Cutting Saw Pipe Cutting Saw ERW Pipe Making Machine
Introduction
Single and multiple head designs are available for small or large products, or reshaped into square or rectangular products. Blade surface speed is adjustable in a 5:1 speed range for optimum cutting speeds for high speed steel or carbide blades. Flying friction saws are available for very fast cutting cycles where end condition is not critical or a secondary end finish is required.
| material | Q195 Q235 SPCC | |
| Cutting range | Square tube:MAX60×60mm | thick:0.5～3.5mm |
| Rectangular tube:MAX 40×80mm | thick:0.5～3.5mm | |
| Cutting length | 1500-99999mm | |
| Operation height | 750mm | |
| Cutting burr height | Max:0.25mm； | |
| Power supply | AC380V,3PH,50HZ | |
| Mechanical length | 5420*1380*1280mm(as per final drawing) | |
| Motor list | Drive:18.5KW | PHASE servo motor |
| feed: 3.3KW | PHASE servo motor | |
| saw: 18.5KW | Siemens AC motor | |
| Linear guide | Hiwin Chinese Taiwan | |
| Oil supply system | Auto oil filling | |
| main shaft gearbox | Special made | |
| Gear rack | KH from Chinese Taiwan | |
| Cable protection | Drag chain | |
Features
1. The base of the equipment is equipped with feeding guide rollers (up and down, left and right rollers), the front end of the fixture is equipped with auxiliary guide rollers, and there are idlers at the final discharge position. All idlers contribute to the parallel movement of the pipe during sawing.
2. Both ends of the saw body are equipped with pulley safety buffers;
3. The saw blade is equipped with a steel brush device, which can remove iron filings on the saw blade when rotating;
Our service
1. Professional pre-sales consultation and after-sales service to help you find the best solution
2. Discuss technical details with our professional engineers
3. Strictly control the quality and production plan of the cold flying saw. You will be kept informed of any progress
4. Check the cold flying saw before shipment
5. After the warranty period, spare parts are provided at cost
6. Professional engineers help you increase production, reduce waste and reduce costs
7. Control the production progress and quality of the machine, and provide you with detailed information in time