Shenyang Jingcheng Electromechanical Equipment Co., Ltd. Bazhou branch
沉阳精诚机电设备有限公司霸州分公司
Add to Cart
cutting blade machine metal cutting circular pipe saw pipe machine cold fly cut pipe saw machine
Introduction
It is manufactured for welded steel pipes. With the cold cutting method, very little heat is generated during the cutting process, thus avoiding the change of stress and material structure in the cut section. At the same time, the saw blade exerts a little pressure on the steel pipe so that the nozzle will not deform. And the cut has no burrs, so the cold cut saw is also called a hairless perforation saw.
| material | Q195 Q235 SPCC | |
| Cutting range | Round tube:MAX63mm | thick:0.5～3.0mm |
| Square tube:MAX50×50mm | thick:0.5～3.0mm | |
| Rectangular tube:MAX 40×60mm | thick:0.5～3.0mm | |
| Production speed | 120m/min(length 6 meter,dia.≤25mm) | |
| Cutting length | 1500-99999mm | |
| Length tolerance | ±1.5mm(speed diviation not more than 2%)； | |
| Operation height | 750mm | |
| Cutting burr height | Max:0.25mm； | |
| Power supply | AC380V,3PH,50HZ | |
| Mechanical length | 4420*1280*1280mm(as per final drawing) | |
| Motor list | Drive:15KW | PHASE servo motor |
| feed: 3.3KW | PHASE servo motor | |
| saw: 15KW | Siemens AC motor | |
| Clamp | Pneumatic | |
| Clamp block model | tape shape to avoid scratching the steel pipe | |
| Oil supply system | Auto oil filling | |
| main shaft gearbox | Special made | |
| Cable protection | Drag chain | |
| Equipment document | User’s manual & electrical diagram | |
Features
1. The cold saw blade rotates at low speed and has low noise;
2. When cutting, the saw blade is crushed without harm to people;
3. Remove the heavy cutting and deburring machine to save costs and improve production efficiency.
our service
1. Professional pre-sales consultation and after-sales service to help you find the best solution
2. Discuss technical details with our professional engineers
3. Strictly control the quality and production plan of the cold flying saw. You will be kept informed of any progress
4. Check the cold flying saw before shipment
5. After the warranty period, spare parts are provided at cost
6. Professional engineers help you increase production, reduce waste and reduce costs
7. Control the production progress and quality of the machine, and provide you with detailed information in time