Shenyang Jingcheng Electromechanical Equipment Co., Ltd. Bazhou branch
沉阳精诚机电设备有限公司霸州分公司
Add to Cart
CNC Cutting Flying Saw Round Double Blade Flying Saw Pipe Cutting Machine
Introduction
In order to achieve the goals of low carbon, environmental protection and light weight, more and more high hardness and high strength materials are used, which is a new challenge for circular saw cutting. On the other hand, sawing very thin pipes without deforming the cut is also a challenge for circular saw blades.
| Material | Q195 Q235 SPCC | |
| Cutting range | Round tube:MAX114mm | thick:0.5～4.0mm |
| Square tube:MAX90×90mm | thick:0.5～4.0mm | |
| Rectangular tube:MAX 50×90mm | thick:0.5～4.0mm | |
| Production speed | 80m/min(length 6 meter,dia.≤25mm) | |
| Feeding direction | ||
| Operation height | 800mm | |
| Cutting burr height | Max:0.25mm； | |
| Power supply | AC380V,3PH,50HZ | |
Features
1. Equipped with adjustable cooling spray pipeline to flush the impurities and iron filings on the saw blade and clamping block;
2. Sawing method: saw blade and feed are adjustable, that is to say, the speed of the feed servo motor is variable, and the speed of the saw blade is variable, so that the utilization rate of the saw blade is greatly improved; and the saw blade wear protection system is provided.
3. The saw blade is equipped with a steel brush device to remove iron filings on the saw blade when rotating;
Our service
1. Professional pre-sales consultation and after-sales service to help you find the best solution
2. Discuss technical details with our professional engineers
3. Strictly control the quality and production plan of the cold flying saw. You will be kept informed of any progress
4. Check the cold flying saw before shipment
5. After the warranty period, spare parts are provided at cost
6. Professional engineers help you increase production, reduce waste and reduce costs
7. Control the production progress and quality of the machine, and provide you with detailed information in time