Shenyang Jingcheng Electromechanical Equipment Co., Ltd. Bazhou branch
沉阳精诚机电设备有限公司霸州分公司
Add to Cart
Erw pipe making machine metal cold fly cutting machine for pipe metal pipe cutting
Introduction
The high-speed hacksaw blade rotates slowly, milling welded pipes without burrs and noise. The sawing process generates very little heat, and the pressure of the saw blade on the steel pipe is very small, which will not cause deformation of the pipe wall.
| material | Q195 Q235 SPCC | |
| Cutting range | Round tube:MAX114mm | thick:0.5～4.0mm |
| Square tube:MAX90×90mm | thick:0.5～4.0mm | |
| Production speed | 80m/min(length 6 meter,dia.≤25mm) | |
| Operation height | 800mm | |
| Power supply | AC380V,3PH,50HZ | |
| Mechanical length | 5420*1480*1380mm(as per final drawing) | |
| Motor list | Drive:18.5KW | PHASE servo motor |
| feed: 3.3KW | PHASE servo motor | |
| saw: 22KW | PHASE servo motor | |
| Clamp | hydraulic pressure | |
| Clamp block model | tape shape to avoid scratching the steel pipe | |
| Saw blade | High speed steel | |
| Main shaft gearbox | Special made | |
| Cable protection | Drag chain | |
| Carriage protection | Safety bumpers for carriage are equipped at both ends | |
Features
The cutting of pipes is a necessary part of making fixed length pipes. The cold saw adopts a high-speed hacksaw blade, which rotates slowly and mills welded pipes without burrs and noise.
Our service
1. Professional pre-sales consultation and after-sales service to help you find the best solution
2. Discuss technical details with our professional engineers
3. Strictly control the quality and production plan of the cold flying saw. You will be kept informed of any progress
4. Check the cold flying saw before shipment
5. After the warranty period, spare parts are provided at cost
6. Professional engineers help you increase production, reduce waste and reduce costs
7. Control the production progress and quality of the machine, and provide you with detailed information in time